The DA300 is inspired by the best design characteristics from both vertical and horizontal machine platforms to deliver the highest productive capabilities for multi–axis workpieces in the very smallest of machine footprints.
These features make the DA300 ideal for single setup, multi–side accessibility, or full contouring capability to quickly and efficiently tackle a wide variety of complex production part applications – typical of industrial hydraulic & pneumatics elements, optical, electrical & semiconductor markets, medical & dental products, die – cast parts, automotive components, aircraft and aerospace parts as well as contract job – shop work.
The DA300 Five – Axis Vertical Machining Center combines a rigid structure and high dynamic motion control to significantly reduce part cycle times while maintaining very accurate performance. Equipped with an integral, DD – motor designed A – Axis and C – Axis, the machine provides five – side access for single set-up production of complex production parts.
At 20,000 RPM, 29.5 HP, HSK – A63, the machine spindle provides the capability to tackle rigorous milling, drilling and tapping tasks associated with a wide variety of production parts. A standard, 60 tool magazine insures an extensive selection of tooling to address any part configuration.
To further minimize non – cut times, the DA300 is standardly equipped with a Vision BTS (Broken Tool Sensor) outside of the machine work zone to insure tooling integrity – but, not impact part cycle times.
The DA300 integral table rectangular table (340 mm x 300 mm) is prepared with pneumatic ports design to readily integrate into a pallet system providing for quick, efficient part exchange – maximizing machine utilization.
Makino also offers two (2) WPS (Workpiece Pallet System) that can be field added to the DA300 machine. These can be configured in a 7 pallet arrangement – that is field expandable – or a 19 pallet configuration. The WPS provides “off – the – shelf” automation for a very productive five – axis machine.
The Makino Professional 6 control takes you from parts to profits with elegant functionality by making the point where human meets machine a seamless transition. Streamlined screen layouts, operator assistance, new machine functions, and safety enhancements are accelerating and protecting your productivity. For even greater productivity, Super Geometric Intelligence 5 (SGI.5) insures optimum performance during execution of the tool path – producing the shortest cycle times.
Standard Specifications
Table
300 mm x 340 mm
X Axis
450 mm
Y Axis
620 mm
Z Axis
500 mm
A Axis
150° (+30 to -120)
C Axis
360°
Spindle RPM
20,000 (HSK - A63)
Rapid Traverse
60,000 mm/min
Cutting Feedrate
60,000 mm/min
Maximum Workpiece
450 mm diameter
Maximum Workpiece Size
Stand alone - ?450 x 400mm, Manual with chuck - ?450 x 295mm, WPS - □355 x 295mm
Maximum Workpiece Weight
Stand alone - 2250 kg, Manual with chuck - 215 kg, WPS - 80 kg
Maximum Payload
250 kg
ATC Capacity
60 tools
Chip to Chip
3.5 sec
Maximum Tool Diameter
70mm / 140mm (ALL / ADJ)
Maximum Tool Weight
8 kg
Standard Features
| Sixty (60) Tool Magazine | Makino Professional 6 Control | Collision Safeguard |
| 20,000 rpm, 2 range, HSK–A63 Spindle | Makino Super Geometric Intelligence SGI.5 Software | Custom Macro (1,100 variables) |
| Automatic Spindle Lubricant Temperature Controller | Data Center (1 GB) | Helical Interpolation |
| Tilt-Trunion Table (A & C axes) | Part Program Storage (2 GB) | Portable MPG |
| Integral Table (13.4” x 11.8”) | Tool Offset Pairs (400 Total) | Air Dryer |
| Machine temperature control | Rigid Tapping | Maintenance Advice System |
| “Core Cooled” Ballscrews | Rigid Tap Retract Function | Inch/Metric Selection |
| Support bearing & drive motor | Five Axis Software: | Fluorescent Worklight |
| A & C Axes DD Motors | TCP – Tool Center Point Control | Programming Data Input (G10) |
| Vision BTS | DFO – Rotary Table Dynamic Fixture Offset | Spindle Load Display |
| Automatic Lubrication Supply Unit | TWP – Tilted Work Plane Command | Spindle Load Monitoring |
| Base Coolant | Three Dimensional Cutter Compensation | Tool Life Management |
| Nozzle Coolant | Inversed Time Function | Direct Spare Tool Selection |
| 210psi Through Spindle Coolant | Program Restart | Dual Safety Check |
| Overhead Shower Coolant | 3-Dimensional Manual Feed | Signal Light (3 layer)6 |
| Right Discharge LUCC | Spindle-Table Interference Prevention Function | |
| Splash and Chip Shield |
